Logo image
Graphene Nanosheets (GNs) addition on the Palm Oil Fuel Ash (POFA) based geopolymer with KOH activator
Journal article   Open access   Peer reviewed

Graphene Nanosheets (GNs) addition on the Palm Oil Fuel Ash (POFA) based geopolymer with KOH activator

A. Amri, Y.B. Hendri, Zultiniar, E. Malindo and M.M. Rahman
Journal of Physics: Conference Series, Vol.1351
2019
pdf
Graphene Nanosheets (GNs) addition on the Palm Oil Fuel Ash (POFA) based geopolymer with KOH activator.pdfDownloadView
Published (Version of Record) Open Access
url
Free to Read *No subscription requiredView

Abstract

Graphene Nanosheets (GNs) have been successfully added to the palm oil fuel ash (POFA) based geopolymer with KOH activator to improve the geopolymer compressive strength. The graphene was synthesized using turbulence assisted shear exfoliation (TASE) method and identified using Raman spectroscopy. The influence of concentrations and weight percent of graphene against the compressive strength, porosity, and morphological properties were investigated. The crystallinity phases of geopolymer and graphene were also identified using XRD. Raman spectroscopy revealed that graphene produced by TASE method had ≥ 3 layers (graphene nanosheets, GNs). Furthermore, Raman maping constructed by the intensity D band showed the graphene had different atomic arrangements at the edge (armchair and zigzag). The compressive strength and the porosity tests showed that increasing the concentration and the weight percent of graphene increased the compressive strength and reduced the porosity. The highest compressive strength and the lowest porosity (10.8 MPa and 5.92%, respectively) were exhibited by the geopolymer synthesized using 0.7 wt% graphene with concentrations of 30 mg/ml. The SEM micrographs indicated that the graphene reduced the porosity of geopolymers with a pores fulfilling mechanism due to of very small of graphene nanosheets size (~60 - ~80 nm).

Details

Metrics

57 File views/ downloads
74 Record Views
Logo image