Logo image
Multilayer Nanostructured Porphyrin Arrays Constructed by Layer-by-Layer Self-Assembly
Journal article   Peer reviewed

Multilayer Nanostructured Porphyrin Arrays Constructed by Layer-by-Layer Self-Assembly

A.R.G. Smith, J.L. Ruggles, A. Yu and IR. Gentle
Langmuir, Vol.25(17), pp.9873-9878
2009
url
Link to Published Version *Subscription may be requiredView

Abstract

UV−vis absorption, atomic force microscopy (AFM), contact angle, and X-ray reflectivity experiments were performed on thin films deposited on crystalline silicon substrates as alternating layers of a porphyrin with anionic functionality, tetra-5,10,15,20-(4-sulfonatophenyl)porphine (TSPP) or the metalated version, Cu(II)TSPP, and the cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA). The films were made by dipping in alternating aqueous solutions containing film components (layer-by-layer deposition). Modeling of the X-ray reflectivity data revealed differences in the films’ thickness depending on the method of film deposition. An unusual decrease in film thickness after each polyelectrolyte dip was also observed for films using TSSP. UV−vis measurements revealed that a similar amount of TSSP was included within films despite the method of formation. UV−vis measurements also revealed the presence of free-base, H-aggregate, and J-aggregate forms of the porphyrin after TSPP dipping, and the subsequent disappearance of the J-aggregate after dipping in the PDDA solution. A model of film formation was proposed on the basis of the concept of two different types of porphyrin aggregates being present after dipping in porphyrin solution. A layer of porphyrin molecules initially attach to the Si surface such that the planar molecules are arranged side by side as H-aggregates with an excess of J-aggregated material on top. The J-aggregate is then removed and replaced by a layer of PDDA. A change in contact angle of 14° was observed between porphyrin and polyelectrolyte layers due to the more hydrophobic nature of the polymer. The presence of the J-aggregate was confirmed in AFM images obtained from the porphyrin layer. Exposure of the films to solutions of alternating pHs of 10 and 1.8 resulted in reproducible switching of the UV−vis spectra, indicating a possible sensing application.

Details

UN Sustainable Development Goals (SDGs)

This output has contributed to the advancement of the following goals:

#3 Good Health and Well-Being

Source: InCites

Metrics

InCites Highlights

These are selected metrics from InCites Benchmarking & Analytics tool, related to this output

Collaboration types
Domestic collaboration
Citation topics
2 Chemistry
2.59 Pigments, Sensors & Probes
2.59.350 Porphyrins
Web Of Science research areas
Chemistry, Multidisciplinary
Chemistry, Physical
Materials Science, Multidisciplinary
ESI research areas
Chemistry
Logo image