Logo image
Back
Pressure leach of β-spodumene with carbonic acid: Weak acid process for extraction of lithium
Journal article   Open access   Peer reviewed

Pressure leach of β-spodumene with carbonic acid: Weak acid process for extraction of lithium

Mahmoud F. Alhadad, Hans C. Oskierski, Johannes Chischi, Gamini Senanayake, Bernhard Schulz, Alexandra A. Suvorova, Sarah E. M. Gain and Bogdan Z. Dlugogorski
Minerals engineering, Vol.204, 108398
2023
DOI: https://doi.org/10.1016/j.mineng.2023.108398
pdf
Pressure leach of β-spodumene with carbonic acid - Weak acid process for extraction of lithium7.93 MBDownloadView
Published (Version of Record)CC BY-NC-ND V4.0,  Open Access

Abstract

Carbonic acid process Dissolution-precipitation mechanism Lithium bicarbonate Mass-transfer limitation Pressure leach of spodumene Weak acid process
This contribution develops a process for recovering lithium from β-spodumene by sequential pressure leach with solutions of carbonic acid, as a replacement for digestion of β-spodumene with concentrated sulfuric acid. Six sequential steps, each operated at 200 °C and 100 bar for 1 h, retrieve 75 % of lithium from the initial feed material. This compares with a 12.6 % Li recovery from a single-stage (batch) operation. We develop both the thermodynamic and mass-transfer models of the leach process and argue that the lithium extraction is mass-transfer controlled. The underlying mechanism involves: (i) near-instantaneous ion exchange between H+ for Li+ at the onset of the digestion; (ii) direct formation of amorphous Li-depleted rinds; (iii) precipitation of secondary minerals, boehmite (AlO(OH)) and skin-forming amorphous silica (SiO2), the latter only in the batch operation; (iv) counter-current diffusion of H+ and Li+ through the surface layer (surface layer = depleted sublayer + precipitation sublayer); (v) dissolution of the surface layer at the solid-solution interface, through the reactions with water. The evidence comes from the near-proportionality between the lithium recovery and mass of dissolved β-spodumene, no detection of keatite-HAlSi2O6, particle morphology, precipitation of amorphous skins of SiO2 decorated with boehmite specks observed by electron microscopy and predicted from thermodynamic modelling as well as from a mass-transfer analysis of the Li-recovery rates. Direct observations confirm the existence of a three-phase reacting system, as predicted from thermodynamic calculations, with the absence of a supercritical fluid phase. Lithium recoveries, of at least 28 % in a single step, are attainable, but only for long contact time of 48 h. Digestion lasting hundreds of hours is needed for the batch process to reach Li extraction corresponding to that of the sequential leach. The challenges for industrial implementation of the process comprise recycling of large amounts of water, avoiding the precipitation of silica that forms rinds, accelerating the hydrolysis of Li-depleted sublayer, concentrating the dilute solutions of Li+ and overcoming hesitance of industry to consider high-pressure treatment.

Details

UN Sustainable Development Goals (SDGs)

This output has contributed to the advancement of the following goals:

#13 Climate Action

Source: InCites

Metrics

26 File views/ downloads
166 Record Views
16 Times Cited - Web of Science

InCites Highlights

These are selected metrics from InCites Benchmarking & Analytics tool, related to this output

Collaboration types
Domestic collaboration
International collaboration
Citation topics
2 Chemistry
2.165 Nanofibers, Scaffolds & Fabrication
2.165.1082 Calcium Carbonate Crystallization
Web Of Science research areas
Engineering, Chemical
Mineralogy
Mining & Mineral Processing
ESI research areas
Geosciences
Logo image