Logo image
Back
The use of impedance measurements in the electrochemistry of the dissolution of sulfide minerals
Journal article   Open access   Peer reviewed

The use of impedance measurements in the electrochemistry of the dissolution of sulfide minerals

M.J. Nicol
Hydrometallurgy, Vol.169, pp.99-102
2017
DOI: https://doi.org/10.1016/j.hydromet.2016.12.013
pdf
nicol6.pdfDownloadView
Author’s Version Open Access
url
Link to Published Version *Subscription may be requiredView

Abstract

Capacitance measurements made in previous studies of the anodic behaviour of chalcopyrite in dilute sulfuric acid solutions have been compared. The results have shown considerable variability in both the absolute value of the capacitance as well as variations with potential. A limited study has been made of such capacitance measurements largely with the aim of establishing the effect of non-steady-state conditions on the capacitance. Potentiostatic measurements at a carefully selected frequency have shown that there is significant variation of the capacitance with time that follows similar trends to the measured current densities. The capacitance decreases with increasing potential in the range 0.40 V to 0.95 V but increases rapidly with increasing potential above 1.0 V. The results of the previous capacitance measurements have been questioned due to a combination of a lack of steady-state conditions and the choice of the measurement frequency. The present results have been interpreted in terms of a previously published model that is similar to the well-known de-alloying of some binary alloys.

Details

Metrics

84 File views/ downloads
78 Record Views
15 Times Cited - Web of Science

InCites Highlights

These are selected metrics from InCites Benchmarking & Analytics tool, related to this output

Citation topics
7 Engineering & Materials Science
7.229 Mineral & Metal Processing
7.229.774 Bioleaching
Web Of Science research areas
Metallurgy & Metallurgical Engineering
ESI research areas
Materials Science
Logo image